Electricians in Mold03.1 / LocationRef · carterelec.co.uk

Local electricians covering Mold
- NICEIC-approved.

NICEIC-approved commercial, industrial, domestic and renewables electricians serving Mold (CH7) and the surrounding Flintshire (Wales). EICR testing, EV chargers, full rewires and commercial fit-outs - delivered by our in-house team from our Christleton base, 13 miles Mold.

Takes 60 seconds • We'll be in touch within 48 hours
CoverageMold & Flintshire (Wales)
AssuranceFully Insured · Guaranteed
AccreditationNICEIC Approved
SectorsCommercial · Domestic · Industrial
Local Electricians in Mold

Electrical work in Mold, done properly the first time.

Mold is the county town of Flintshire and our primary foothold for cross-border Welsh work. The CH7 postcode covers a wide rural area — so alongside the town-centre commercial and hospitality trade, we carry out a lot of three-phase agricultural supplies, farm and outbuilding installs, and sensitive domestic rewires through Gwernaffield, Nercwys and Leeswood. We hold NICEIC approval that's recognised across England and Wales, and we're comfortable with both sides of the border's Building Regulations regime.

Mold - Carter Electrical Contractors man with clipboard
Coverage
CH7
Response time
Within 48 hours
Distance from HQ
13 miles
Accreditation
NICEIC + OZEV
Documented projects
2 in Mold
Services

The full electrical scope for Mold.

Five service lines, one in-house team. Here's how each applies to the Mold market - and what our Mold clients most often call us about.

Commercial in Mold

Commercial electricians in Mold

Design and install for offices, hospitality, retail and light commercial.

  • Full distribution & sub-mains
  • Lighting design & controls
  • Emergency lighting & fire alarm
  • Data & containment
Industrial in Mold

Industrial electricians in Mold

Three-phase power, machinery wiring and maintenance contracts.

  • Three-phase & motor control
  • Machinery install & relocation
  • Preventative maintenance
  • Thermal imaging surveys
Domestic in Mold

Domestic electricians in Mold

Rewires, extensions and smart-home work across Chester and the North West.

  • Full & partial rewires
  • Replacement Consumer Units
  • Extensions & loft conversions
  • Smart lighting & heating
Testing & Inspection in Mold

Testing & Inspection electricians in Mold

EICRs, landlord reports and PAT testing. NICEIC-approved.

  • EICR reports (commercial & domestic)
  • Landlord electrical safety
  • PAT testing
  • New-install certification
Renewables & EV in Mold

Renewables & EV electricians in Mold

EV chargers, solar PV and battery storage. OZEV-approved installer.

  • EV chargers (domestic & commercial)
  • Solar PV & battery
  • Load management
  • Grid application support
Commercial in Mold

Commercial electricians in Mold.

Mold town centre — Daniel Owen Square, the Market and High Street — drives most of our commercial work: small-to-mid fit-outs, landlord EICRs, emergency-lighting upgrades and PAT testing. We also serve the Flintshire-wide education and local-authority estate.

Typical scopes we quote for in Mold: full distribution and sub-mains replacements, emergency-lighting upgrades to BS 5266, BS 5839-1 fire detection, retail and restaurant fit-outs, data containment and structured cabling, EICR remedials following a failed report, and scheduled shutdowns timed around the business's trading hours.

Domestic in Mold

Domestic electricians in Mold.

Rural demand is a big part of CH7: outbuilding supplies, three-phase for farms, smart-home and EV-charger installs for commuter villages, and full rewires on older stone-built properties.

Common domestic jobs across Mold: full and partial rewires, replacement consumer units (fuseboards), OZEV-approved EV charger installs with load management, smart-lighting and smart-heating retrofits, extensions, loft conversions and garage conversions, external lighting and outbuilding supplies, and fault finding when a main breaker keeps tripping.

Neighbourhoods served

Areas of Mold we cover.

Our electricians work across every part of Mold - covering CH7. If your address is inside any of the following neighbourhoods, you're well inside our core coverage zone:

Buckley
New Brighton
Gwernaffield
Gwernymynydd
Leeswood
Nercwys
Pontblyddyn
Sychdyn
Alltami

We also work around key Mold locations including Mold High Street, Daniel Owen Square, Theatr Clwyd, Loggerheads Country Park (nearby), Alltami/Buckley commercial belt. If you're scoping electrical work at one of these or on a nearby site, we've likely been on-site in the area recently — ask us for a reference.

Recent work in Mold

A Mold project we delivered.

A three-phase agricultural supply and outbuilding install for a working farm in the Nercwys area, including a dedicated ASHP circuit and external yard lighting.

We've completed 2 documented electrical installations or compliance programmes in and around Mold. Our work is built on reliability, transparent pricing (the number on the quote is the number on the invoice), and rigorous NICEIC-standard safety.

Questions we get from Mold

Frequently asked questions.

Are your electricians NICEIC-approved and qualified to work in Mold?

Yes. Carter Electrical Contracting is a fully NICEIC-approved contractor, and every electrician dispatched to Mold works to BS 7671 (18th Edition, including the latest amendments). Certification is issued at handover on every job — EIC, minor works or EICR as appropriate — and logged against the property address so it's straightforward to retrieve if you need it for insurance, a landlord pack or a future sale.

What's your typical lead time for a new project in Mold?

It depends on scope. A small domestic job — a replacement consumer unit, a few additional circuits, a single EV charger — we can usually schedule within a week or two of sign-off. A larger commercial fit-out or industrial installation normally goes through a site visit, a detailed scope and a formal quote first, and we'll give you an honest date at that stage rather than overpromise. Our phone is answered during working hours by the same team that schedules the engineers, so you'll get a straight answer on timings.

Which Mold postcodes and neighbourhoods do you cover?

We cover every postcode inside Mold and its surrounding villages — primarily CH7. That includes Buckley, New Brighton, Gwernaffield, Gwernymynydd, Leeswood and the rest of the Flintshire (Wales) area. If you're unsure whether your address is in our usual radius, call us with the postcode and we'll confirm before scheduling.

Do you carry out EICRs and landlord electrical-safety reports in Mold?

Yes. We're a go-to contractor for EICRs across Mold — both for commercial landlords ahead of lease renewals and for residential landlords meeting the five-yearly Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020, or the equivalent Welsh legislation where applicable. Reports are issued as a signed PDF within 48 hours of the test, with remedial quotes broken out clearly so you can decide what's urgent.

Can you install an OZEV-approved EV charger at a home or business in Mold?

Yes — we're OZEV-approved and install 7 kW single-phase and 22 kW three-phase chargers throughout Mold. For domestic installs we handle the DNO notification, load management (so your main supply doesn't get overloaded) and OLEV/EV-chargepoint grant paperwork where you're eligible. For workplace installs we can scope multi-bay back-office systems with RFID authorisation and billing integration.

Do you work on heritage, listed or conservation-area properties in Mold?

Yes, and we do it often. Mold's older property stock needs a different hand — surface-clipped cable runs on stone walls, concealed containment through plasterwork, period-sympathetic switch and socket plates, and documentation that will satisfy both a conservation officer and the NICEIC. We scope heritage work slowly on the first visit so you know exactly what's going where before anything is cut or chased.

Also covering

Other areas near Mold.

We cover the wider Flintshire (Wales) region from our Chester base. If you're scoping work outside Mold proper, the following are also in our core patch:

Electricians in ChesterElectricians in Ellesmere PortElectricians in WrexhamElectricians in NorthwichElectricians in FrodshamElectricians in Tarporley
Start a conversation

Need an electrician in Mold?
Get in touch today.

Brief the scope in three steps. We'll be in touch within 48 hours.

Direct line
· 01244 727291
Get Your Free Quote
🔒100% Secure. No obligation. Your data is strictly protected.
Tweaks